7 x 4 Phoenix General Purpose / Box Trailer

This trailer can easily be used as a BOX trailer when the cover is used. Making this trailer a very affordable Box trailer. The chassis is built of box steel and the floor also has box steel braces for extra strength and rigidity. The draw bar is “A” frame design for extra strength and is again Hot Dip Galvanised. The front and rear tail gate open for extra length to make loading easy. The sides are fitted with easily removable one metre high mesh sides.

Other single axle sizes  8×4, 8×5 and 6×4 .

Picture show extras and modifications

Features of our General / Box Purpose trailers include:

• Zinc coated steel floor with angle under floor braces
• The sides and doors are Hot Dip Galvanised steel
• One metre high mesh sides fitted (easily removable)
• Front and rear tailgates open for extra length if required
• All wiring is channelled through the chassis
• Fully fitted lights with front  marker and fog light to  UK & EU standards
• The tyres are 13″ and are rated to carry much more weight than the 750kg gross weight of this trailer
• Spare wheel and carrier fitted ( can be located above or below the A Frame )
• The trailer is fitted with a good quality Telescopic Jockey Wheel as standard
• Gross weight 750kgs or 1300kgs if braked
• Length 11ft overall approx 335cms
• Width 5ft 8 overall approx 170cms
• Internal measurements 207 cms x 130 cms

Optional Extras

• Prop stands
• Locking coupler
• Folding mesh rear gate/ramp 1.7 m
• Chequer folding rear gate/ramp 1.7
• Solid mesh rear gate/ramp 1.3 m
• Chequer rear gate/ramp 1.3 m
• Mesh roof
• Opening front mesh
• Lowering / highering of sides
• Ladder rack
• Tie down points
• Checker tool box 675 x 300 x 300 mm
• Bike ramp
• Bike hoop
• Wheel chock

Most modifications undertaken – please ring 01746 767664